I know a lot of people want to know if EasyPress 2 is right for you! This report will guide you through all the knowledge you need to make the right decision.
EasyPress 2 comes in three sizes that offer flawless results to make almost any iron-on project in 60 seconds or less. EasyPress 2 gives you projects you’ll be proud of every time.
What is a Cricut EasyPress?
If you are just getting started with the Cricut you might not even know what an EasyPress is.
Not Fun, Right?
The Cricut Easypress 2 machine is designed to offer professional iron-on results in a minute or less. This machine combines the speed of a conventional heat press and the convenience of a typical iron box to deliver fast and foolproof results that will last long even after repeated washes. Its evenly heated plate and easy to use controls put it head and shoulders above most iron-on boxes on the market. It rocks variable temperature control settings up to 400°F (205°C) making it ideal for both large and layered projects.
On top of that, the Easypress 2 comes equipped with a handful of safety features such as auto-shutoff and an insulated resting base.
Cricut Easypress 2 vs. Easypress
As shown in the figure below, this form gives us a lot of information, and here we will explain more information about Easypress 2 functions
Size: The original Easy Press comes in one size: 9″×9″. The EasyPress 2 comes in three different sizes: 6″×7″, 9″×9″, and 12″×10″.
Heat Up Time: The EasyPress 2 rises to temperature up to 25% faster than the original. The mini size heats up in just over one minute, and the medium size takes just two minutes.
Max temperature: The EasyPress 2 has a max temp of 400 degrees, compared to the original’s max temp of 350.
LinkedGo Easypress Mat
With bigger (and smaller!) machines, comes a need for bigger (and smaller) mats. The LinkedGo Easypress Mats are available in three sizes, perfectly fitted to your machine.
Cricut EasyPress 2 Anatomy
Cricut EasyPress 2 supports a broader range of materials and sizes of iron-on projects with higher temperature settings, faster heat-up times and a thicker heat plate design for more uniform heating for long-lasting results.
6 x 7 Inches: this is the the perfect size for petite or small projects. It’s perfect for traveling and ideal for baby clothing, bibs, cosmetics bags, and other small surfaces.
9 x 9 Inches: This size is perfect for medium projects. T-shirts, Wood and Metal surfaces, etc.
12 x 10 Inches: This is the Jumbo size and is deal for those large big projects such as large T-Shirts, Hoodies, and large projects.
How the Cricut Easypress works
To power up the device, all you have to do is press the power button to the left of the display. With the device on, you need to find a firm, flat and heat-resistance surface. With the pressing surface in place, set the timer and temperature to match your project needs.
To adjust the timer button, use the +/- buttons to specify the desired heating time for your iron-on project. Upon pressing the temperature button, the machine will begin to heat up; use the +/- buttons to either increase or decrease temperature. Note that the Cricut device displays an orange color when adjusting the temperature and will turn green once the desired setting is achieved.
It usually takes roughly two minutes and five seconds for the device to heat up from 0 to 400°F. The device will automatically beep to signal it is ready for use. Place your shirt or other base material on top of a silicone foam mat and pre-heat it for 3 to 5 seconds to eliminate wrinkles. Place your vinyl design on the base material. Remove the Easypress 2 from its base and it directly on the vinyl decal.
Then press the green Cricut button to initiate the timer. Hold the machine in place and apply gentle pressure while pressing until the device beeps. Remember to keep the machine still during the entire process. With the pressing complete, return the press back to its stand then wait for the liner to cool down before removing it from the heat transfer vinyl.
What is a LinkedGo EasyPress Mat?
LinkedGo EasyPress Mat comes in one size: 12″×12″, it is suitable for three different sizes of Cricut easypress 2. We will also launch two sizes of 8″×10″ and 16″×20″ in the future.
Some people will buy the 3 of them, and I just can’t imaging needing the three of them right now. The size you get should be the one you think you will be using more.
- LinkedGo Easypress mat is designed to work with cricut easypress 2, cricut easypress and all iron for flawless iron-on transfers.
- LinkedGo Easypress mat both sides reusable and heat resistant, and made of heat fire insulation foam material, surface with highly insulated ironing cloth provides smooth and even surface, innovative construction eliminates moisture and directs heat to your iron-on design, while protecting your countertop and furniture from excessive heat.
- Easypress mat is ideal for heat press transfers, pressing, ironing, sewing projects like T-shirts, sweatshirts, banners, blankets, and more. lightweight and portable, the easypress mat for heat press can turn any flat surface into a place to iron, great choice for classes or travel
- Simply glide the easypress mat into or under your T-shirts where you are going to be heat pressing. That indentation that comes with using a easypress mat can be eliminated by using the heat press mat.
If you like this post and think someone else could benefit from it, make sure to post it on your favorite social media, by doing so, you aren’t only helping someone else to learn and find cool resources, but you are also supporting my work.
Oh! And just so you know, I also have a FREE growing freebies with tons of printables and SVG files ready to be cut. I would love for you to be able to get access to all of them.
Special gift to you
This is two new products launched by our LinkedGoVinyl, it suitable for Silhouette Cameo and Cricut Explore One/Air/Air 2/Maker